RS232 / 485 / 422 Converters
RS232 Isolators & RS232 Repeaters
Fiber Optic Converters
USB Serial Adapters
Advanced Serial Protocol Analyzer

LG Solutions, Inc. offers the finest quality data converter products from CommFront Communications, including USB, RS-232, RS-485, RS-422 & TTL (5V and 3.3V) Converters / Isolators / Repeaters, Serial / Ethernet to Fiber Optic Media Converters, and Advanced RS232 Serial Protocol Analyzer software.

RS232/RS485/RS422 converters, TTL, USB Serial converters, Fiber optic converters certified by SGS TUV
  • BBB Accredited Bussiness in United States
  • Credit Cards, Paypal, Checks & PO Accepted
  • 10% Discount for Orders of 10 Units or Greater
  • FREE Shipping (from Maryland) within USA
  • Optional FedEx Overnight / 2-Day Shipping
  • 30-Day Money Back / 5-Year Warranty
  • World-Class Products Certified by: SGS/TUV

INDUSTRIAL RS232 TO RS485 / RS232 TO RS422 CONVERTERS

    We offer a range of high-quality, industrial-grade, port-powered RS232 to RS485 converters and RS232 to RS422 converters. These plug-and-play converter products operate within a wide temperature range (-40F to 185F / -40C to 85C), feature 600W surge protection and 15kV static protection, and come with built-in 120 Ohm terminators for easy installation. Whether your environment is commercial or industrial, "clean" or "noisy", our RS232 to RS485 and RS232 to RS422 converter products provide safe, easy, and cost-effective solutions for your data conversion device protection applications.
Industrial RS232 to RS485 Converter

RS232 to RS485 Converter

    - Port-powered with higher sensitivity and higher power efficiency.
    - Supports 128 nodes of RS-485 devices.
    - Operates reliably from 300 to 115,200 baud.
    - Plug and play (hot-pluggable, data format auto-sensing and self-adjusting).
    - Data direction auto-turnaround, no software driversor flow control is required.
    - Built-in 600W surge protection, 15kV static protection and circuit protection.
    - Built-in selectable 120-Ohm terminator for system reliability and easy installation.
    - Rugged 5-way terminal block requires no screws and nuts.
Industrial RS232 to RS422 Converter

RS232 to RS422 Converter

    - Port-powered, no external power is required.
    - Supports 128 nodes of RS-422 devices.
    - Operates reliably from 300 to 115,200 baud.
    - Plug and play (hot-pluggable, data format auto-sensing and self-adjusting).
    - Full-duplex communication requires no software drivers or flow control.
    - Built-in 600W surge protection, 15kV static protection and circuit protection.
    - Built-in selectable 120-Ohm terminator for system reliability and easy installation.
    - Accepts external 5VDC regulated power if the port power is insufficient.
Industrial RS232 to RS422 RS485 Converter

RS232 to RS422/485 Converter

    - Port-powered, no external power is required.
    - Supports 128 nodes of RS-422/RS-485 devices.
    - Operates reliably from 300 to 115,200 baud.
    - Plug and play (hot-pluggable, data format auto-sensing and self-adjusting).
    - Data direction auto-turnaround, no software driversor flow control is required.
    - Built-in 600W surge protection, 15kV static protection and circuit protection.
    - Built-in selectable 120? terminator for system reliability and easy installation.
    - Accepts external 5VDC regulated power if the port power is insufficient.

INDUSTRIAL RS232 RS485 RS422 TO TTL CONVERTERS

    We offer a range of high-quality, industrial-grade, port or external-powered RS232 RS485 RS422 to TTL converter products. These plug-and-play RS232 to TTL converter and RS485 / RS422 to TTL converter products operate within a wide temperature range (-40F to 185F / -40C to 85C), feature 600W surge protection and 15kV static protection, and come with built-in 120 Ohm terminators for easy installation. Whether your environment is commercial or industrial, our TTL converter products provide safe, easy, and cost-effective solutions for your data conversion applications.
Industrial RS232 to TTL 5V Converters

RS232 to TTL/CMOS 5V Converter

    - Converts RS232 to 5V TTL/CMOS and vice versa.
    - Port-powered with high power efficiency (less than 10mA).
    - Plug and play (hot-pluggable; data format auto-sensing & self-adjusting).
    - Built-in 600W surge protection and 1500V ESD protection.
    - Operates from 300 to 115.2K baud.
Industrial RS232 to TTL 3.3v Converters

RS232 to TTL/CMOS 3.3V Converter

    - Converts RS232 to 3.3V TTL/CMOS and vice versa.
    - Port-powered with high power efficiency (less than 10mA).
    - Plug and play (hot-pluggable; data format auto-sensing & self-adjusting).
    - Built-in 600W surge protection and 1500V ESD protection.
    - Operates from 300 to 115.2K baud.
  1. Show Other Industrial RS232 RS485 RS422 To TTL Converters.
      RS485 to TTL/CMOS 5V Converter
      RS485 to TTL/CMOS 5V Converter
        - Converts RS485 to 5V TTL/CMOS and vice versa.
        - External 5VDC-powered (5VDC regulated power adapter included).
        - Plug and play (hot-pluggable; data format auto-sensing & self-adjusting).
        - Built-in 600W surge protection and 1500V ESD protection.
        - Selectable 120-Ohm terminator for RS485 networks.
        - Operates from 300 to 115.2K baud.
      RS422/485 to TTL/CMOS 5V Converter
      RS422/485 to TTL/CMOS 5V Converter
        - Converts RS485 or RS422 to 5V TTL/CMOS and vice versa.
        - External 5VDC-powered (5VDC regulated power adapter included).
        - Plug and play (hot-pluggable; data format auto-sensing & self-adjusting).
        - Built-in 600W surge protection and 1500V ESD protection.
        - Selectable 120-Ohm terminator for RS485/RS422 networks.
        - Operates from 300 to 115.2K baud.

INDUSTRIAL RS232 ISOLATORS / OPTO-ISOLATED CONVERTERS

    We offer a range of high-quality, industrial-grade, port-powered RS232 isolators. These plug-and-play products operate within a wide temperature range (-40F to 185F / -40C to 85C), feature 600W surge protection and 15kV static protection, and come with built-in 120 Ohm terminators for easy installation. Whether your environment is commercial or industrial, "clean" or "noisy", our isolator and converter products provide safe, easy, and cost-effective solutions for your data extension and device protection applications.
RS232 Isolator (3-Wire / Port-Powered)

RS232 Isolator (3-Wire / Port-Powered)

    - Port-powered with high-power efficiency (less than 10mA).
    - 5000V opto-isolation for TX, RX, and GND.
    - Protects RS232 devices from ground loops, noises, surges, lightning and spikes.
    - Plug and play (hot-pluggable; data format auto-sensing & self-adjusting).
    - Built-in 600W surge protection and 1500V ESD protection.
    - Operates from 300 to 38.4K baud.
RS232 Isolator (7-Wire / Port-Powered)

RS232 Isolator (7-Wire / Port-Powered)

    - Port-powered with high-power efficiency (less than 10mA).
    - 2500V opto-isolation for TX, RX, RTS, CTS, DTR, DSR, and GND.
    - Protects RS232 devices from ground loops, noises, surges, lightning and spikes.
    - Plug and play (hot-pluggable; data format auto-sensing & self-adjusting).
    - Built-in 600W surge protection and 1500V ESD protection.
    - Operates from 300 to 19.2K baud.
  1. Show Other Industrial Opto-Isolated Converters.
      Highspeed RS232 Isolator
      RS232 Isolator (3-wre / Externally-Powered)
        - 5000V opto-isolation for TX, RX, and GND.
        - External 5VDC-powered (5VDC regulated power adapter included).
        - Protects RS232 devices from ground loops, noises, surges, lightning and spikes.
        - Plug and play (hot-pluggable; data format auto-sensing & self-adjusting).
        - Built-in 600W surge protection and 1500V ESD protection.
        - Operates reliably from 300 to 115.2K baud.
      Isolated RS232 to RS485 Converter
      Isolated RS232 to RS485 Converter
        - Port-powered with high-power efficiency (less than 10mA).
        - 2500V opto-isolation.
        - Supports up to 64 units of RS485 devices.
        - Plug and play (hot-pluggable; data format auto-sensing & self-adjusting).
        - Selectable 120-Ohm end-of-line terminator.
        - Built-in 600W surge protection and 1500V ESD protection.
        - Operates from 1.2K to 57.6K baud.
      Isolated RS232 to RS422 Converter
      Isolated RS232 to RS422 Converter
        - Port-powered with high-power efficiency (less than 10mA).
        - 2500V opto-isolation.
        - Supports up to 64 units of RS485 devices.
        - Plug and play (hot-pluggable; data format auto-sensing & self-adjusting).
        - Selectable 120-Ohm end-of-line terminator.
        - Built-in 600W surge protection and 1500V ESD protection.
        - Operates from 1.2K to 57.6K baud.
      Isolated RS232 to RS485/RS422 Converter
      Isolated RS232 to RS485/RS422 Converter
        - Port-powered with high-power efficiency (less than 10mA).
        - 2500V opto-isolation.
        - Supports up to 64 units of RS485 devices.
        - Plug and play (hot-pluggable; data format auto-sensing & self-adjusting).
        - Selectable 120-Ohm end-of-line terminator.
        - Built-in 600W surge protection and 1500V ESD protection.
        - Operates from 1.2K to 57.6K baud.
      Isolated RS232 to RS485/RS422 Converter Externally Powered
      Isolated RS232 to RS485/RS422 Converter (Ext-Powered)
        - 2500V opto-isolation.
        - Supports 2-wire RS485 and 4-wire RS485/RS422 networks.
        - Supports up to 128 units of RS485 or RS422 devices.
        - Direct DIN-rail (rack) or wall / panel mounting.
        - Plug and play (hot-pluggable; data format auto-sensing & self-adjusting).
        - 10-way terminal block with external 9 to 30V DC input.
        - Selectable 120-Ohm end-of-line terminator.
        - Built-in 600W surge protection and 1500V ESD protection.
        - Operates from 300 to 115.2K baud.

INDUSTRIAL RS232 RS485 RS422 REPEATERS

    We offer high-quality, industrial-grade, port or external-powered RS232 Repeater / RS485 RS422 Repeater products. These plug-and-play RS232 Repeater and RS485 / RS422 Repeater products operate within a wide temperature range (-40F to 185F / -40C to 85C), feature 600W surge protection and 15kV static protection. Whether your environment is commercial or industrial, "clean" or "noisy", our RS232 Repeater and RS485 / RS422 Repeater products provide safe, easy, and cost-effective solutions for your data-communication applications.
RS232 Repeater (3-Wire / Port-Powered)

RS232 Repeater (3-Wire / Port-Powered)

    - Port-powered, no external power required.
    - Extends RS232's distance to up to 1.8 miles (3km).
    - Optical isolation eliminates ground loop and noise problems.
    - Current loop circuit provides better noise immunization.
    - Plug and play (hot-pluggable, data format auto-sensing and self-adjusting).
    - Built-in 600W surge protection, 15kV static protection and circuit protection.
RS485 to RS422 Repeater/Converter

RS485 to RS422 Repeater/Converter

    - Industrial grade enclosed in a rugged, rustless ABS housing.
    - Plug and play (hot-pluggable, data format auto-sensing and self-adjusting).
    - Data direction auto-turnaround, no software drivers or flow control is required.
    - Built-in 600W surge protection, 15kV static protection and circuit protection.
    - Built-in selectable 120-Ohm end-of-line terminator.
    - 300 to 115.2K Baud Operation.
RS485 to RS422 Isolated Repeater/Converter

RS485 to RS422 Isolated Repeater/Converter

    - 2500V opto-isolation.
    - Extends RS485 or RS422's distance to up to 4000ft (1.2km).
    - Isolates one group of RS485 / RS422 equipment from another.
    - Converts 2-wire RS485 to 4-wire RS422 and vice versa.
    - Direct DIN-rail (rack) or wall / panel mounting.
    - Plug and play (hot-pluggable; data format auto-sensing and self-adjusting).
    - Built-in 600W surge protection and 1500V ESD protection.
    - 300 to 115.2K Baud Operation.
Isolated RS485 Hub / Splitter / Repeater

Isolated RS485 Hub / Splitter / Repeater

    - Expands RS-485 networks by splitting one RS-485 network into four, making star-wiring possible for RS-485 networks.
    - Industrial grade enclosed in a rugged, rustless ABS housing.
    - Direct DIN-Rail or wall/panel mounting without using any unsecured brackets or adapters.
    - Supports up to 512 (4x 128) nodes of RS-485 devices.
    - Supports data rates up to 115,200bps.
    - Data direction auto-turnaround, no software drivers or flow control is required.
    - Plug and play (hot-pluggable, data format auto-sensing and self-adjusting).
    - Built-in 600W surge protection, 15kV static protection and circuit protection.

USB SERIAL ADAPTERS

USB to Single RS232 Adapter

USB to Single RS232 Adapter

    - Adds one RS-232 ports to your USB port.
    - RS-232 data & signals: TX, RX, RTS, CTS, DTR, DSR, DCD, RI, and GND.
    - Supports remote wakeup and power management.
    - No IRQs required, no IRQ conflicts.
    - Port-powered, no external power required.
    - Plug and play (hot-pluggable, data format auto-sensing and self-adjusting).
    - Supports Windows 8/7/Vista/XP/Server2008/Server2003/2000/98 (32-bit), Windows 8/7/Vista/XP/Server2008/Server2003 (64-bit), Win CE, Mac, and Linux.
USB to Dual RS232 Adapter

USB to Dual RS232 Adapter

    - Adds two RS-232 ports to your USB port.
    - RS-232 data & signals: TX, RX, RTS, CTS, DTR, DSR, DCD, RI, and GND.
    - Supports remote wakeup and power management.
    - No IRQs required, no IRQ conflicts.
    - Port-powered, no external power required.
    - Plug and play (hot-pluggable, data format auto-sensing and self-adjusting).
    - Supports Windows 8/7/Vista/XP/Server2008/Server2003/2000/98 (32-bit), Windows 8/7/Vista/XP/Server2008/Server2003 (64-bit), Win CE, Mac, and Linux.
USB to RS485 Adapter

USB to RS485 Converter

    - Adds one RS-485 port to your USB port.
    - Port-powered, no external power required.
    - Supports 256 nodes of 2-wire RS-485 devices.
    - Rugged terminal block with built-in selectable 120-Ohm terminator.
    - Operates reliably from 300 to 3M baud.
    - Supports remote wakeup and power management.
    - Built-in 15kV ESD static and circuit protection.
    - Supports Windows 8/7/Vista/XP/Server 2008/Server 2003/2000/98 (32-bit), Windows 8/7/Vista /XP/Server 2008/Server 2003 (64-bit), Win CE, Mac, and Linux.
Opto-Isolated USB to RS232/485/422 Converter

Opto-Isolated USB to RS232/485/422 Converter

    - USB port powered, no external power is required.
    - 2500V opto-isolation.
    - Direct DIN-Rail or wall/panel mounting.
    - Communicate with one loop of up to 128 units of RS485/RS422 devices.
    - RS485/RS422 auto-detection, no jumper setting is required.
    - Plug and play; Data direction auto-turnaround, no flow control is required.
    - Built-in 600W surge protection, 15kV static protection and circuit protection.
    - Built-in 120-Ohm end-of-line terminators for system reliability and easy installation.
    - Supports high-speed data rates: 300 to 115,200 bps.
    - Compatible with Windows 8/7/Vista/XP/Server2003/2000 (32-bit), Windows 8/7/Vista (64-bit), Win CE (5.0, 6.0), Mac OSX, and Linux (2.6x, 2.4.36).
  1. Show Other USB Adapters / Converters.
      USB to Dual RS485 Converter
      USB to Dual RS485 Converter
        Combining the USB-232A-1 (USB to Dual RS232 Adapter) and two units of CVT-485-1 (Port-powered RS232/RS485 converter) allows you to turn your USB port into two RS485 ports, which can be used to communicate with up to two loops (each loop supports up to 32 nodes) of RS485 devices. The unit uses the latest FTDI chipset and is fully compatible with Windows 8/7/Vista/XP/ Server2008/2003 (32-bit and 64-bit), Windows 2000 (32-bit), Win 98/CE, Mac, and Linux.
      USB to RS422 Converter
      USB to RS422 Converter
        The CommFront USB-422-1 is a port-powered USB to RS-422 serial adapter that can be used to convert any standard USB port (USB 2.0 - backward compatible) into a RS-422 port. The unit uses the latest FTDI chipset and is fully compatible with Windows 8/7/Vista/XP/Server2008/2003 (32-bit and 64-bit), Windows 2000 (32-bit), Win 98/CE, Mac, and Linux.
      USB to Dual RS422 Converter
      USB to Dual RS422 Converter
        Combining the USB-232A-1 (USB to Dual RS232 Adapter) and two units of CVT-485_422-1 (Port-powered RS232 to RS422/485 converter) allows you to turn your USB port into two RS422 ports, which can be used to communicate with up to two loops (each loop supports up to 32 nodes) of RS422/485 devices. The unit uses the latest FTDI chipset and is fully compatible with Windows 8/7/Vista/XP/ Server2008/2003 (32-bit and 64-bit), Windows 2000 (32-bit), Win 98/CE, Mac, and Linux.
      USB to TTL Converter
      USB to TTL Converter
        Combining the USB-232-1 (USB to Single RS232 Adapter) and TTL-232-1 (Port-powered RS232/TTL converter) allows you to convert USB to 5VDC TTL/CMOS compatible levels and vice versa. The unit uses the latest FTDI chipset and is fully compatible with Windows 8/7/Vista/XP/ Server2008/2003 (32-bit and 64-bit), Windows 2000 (32-bit), Win 98/CE, Mac, and Linux.
      USB to Dual TTL Converter
      USB to Dual TTL Converter
        Combining the USB-232A-1 (USB to Dual RS232 Adapter) and two units of TTL-232-1 (Port-powered RS232/TTL converter) allows you to convert USB to two channels of 5VDC TTL/CMOS compatible levels and vice versa. The unit uses the latest FTDI chipset and is fully compatible with Windows 8/7/Vista/XP/ Server2008/2003 (32-bit and 64-bit), Windows 2000 (32-bit), Win 98/CE, Mac, and Linux.
      USB to TTL 3.3v Converter
      USB to TTL 3.3v Converter
        Combining the USB-232-1 (USB to Single RS232 Adapter) and TTL33-232-1 (Port-powered RS232/TTL 3.3V converter) allows you to convert USB to 3.3V TTL/CMOS compatible levels and vice versa. The unit uses the latest FTDI chipset and is fully compatible with Windows 8/7/Vista/XP/ Server2008/2003 (32-bit and 64-bit), Windows 2000 (32-bit), Win 98/CE, Mac, and Linux.
      USB to Dual TTL 3.3v Converter
      USB to Dual TTL 3.3v Converter
        Combining the USB-232A-1 (USB to Dual RS232 Adapter) and two unites of TTL33-232-1 (Port-powered RS232/TTL 3.3V converter) allows you to convert USB to two channels of 3.3V TTL/CMOS compatible levels and vice versa. The unit uses the latest FTDI chipset and is fully compatible with Windows 8/7/Vista/XP/ Server2008/2003 (32-bit and 64-bit), Windows 2000 (32-bit), Win 98/CE, Mac, and Linux.

SERIAL / ETHERNET FIBER OPTIC CONVERTERS

RS232/RS485/RS422 to Fiber Optic Converter

RS232/RS485/RS422 to Fiber Optic Converter

    The CommFront FBR-Serial-2 (Rack/Wall-mount) is a rugged, industrial-grade (-40F to 185F / -40C to 85C), multi-function RS232 / RS485 / RS422 to Fiber Optic Converter (fiber optic modem) that supports asynchronous serial communications (RS-232, RS-485, and RS-422) through fiber optic links. Besides the capability of long distance data transmission, fiber optic products are inherently resistant to EMI/RFI and transient surges; therefore, they are ideal for data communications near heavy electrical equipment and other electrical or radio interference.

    This rugged industrial-grade Serial-to-Fiber-Optic converter operates within a wide temperature range (-40F to 185F/-40C to 85C), and features 600W surge protection and 15kV static protection. It requires no software drivers or flow control, making the unit a rugged, highly reliable, and truly plug-and-play device.

    Depending on the fiber cable and the type of converter used, a Single-Mode fiber optic converter can extend the RS232 / RS485 / RS422 distance to up to 24.8 miles (40 km), while a Multi-Mode fiber optic converter can extend the RS232 / RS485 / RS422 distance to up to 1.2 miles (2 km). Standards can be mixed and matched, so RS-232 devices can be connected to RS485 / RS422 devices, or RS485 (2-wire) devices can be connected to RS422 (4-wire) devices without using a converter and isolator.

    The FBR-Serial-2 comes with the options of ST, SC and FC connectors for fiber optic links, and, thanks to the professional and unique casing design, the product can be mounted directly on wall/panel or DIN Rail, without a need of using any unsecured adapters. A separate external power supply is included in the package.

    Baud rates: 300 to 115.2K Baud.
Ethernet to Fiber Optic Converter

Ethernet to Fiber Optic Converter

    The FBR-Ethernet-2 is a compact, rugged, light-weight, high-quality 10/100M Ethernet to fiber optic media converter, which provides one channel for media conversion between 10/100BaseTX and 100BaseFX. Besides the capability of long distance data transmission, fiber optic products are inherently resistant to EMI/RFI and transient surges; therefore, they are ideal for data communications near heavy electrical equipment and other electrical or radio interference.

    This superior-quality industrial Ethernet-to-Fiber-Optic converter is enclosed in a heavy-duty, rustless ABS housing (the improved version of our previous steel housing), it operates within a temperature range of -40F to 185F (-40C to 85C), and features 600W surge protection and 15kV static protection. The unit features auto-negotiation for half or full-duplex and 10 or 100Mbps data rates, it also supports MDI (straight-through) and MDIX (crossover) cables, therefore, no DIP switch, jumper settings or software drivers are required, making the unit a highly reliable and truly plug-and-play device. Depending on the fiber cable and the type of media converter used, a single-mode media converter can extend the 10/100M Ethernet distance to up to 12.4 miles (20 km), while a single-mode media converter can extend the distance to up to 1.2 miles (2 km).

    The FBR-Ethernet-2 comes with the options of ST, SC and FC connectors for fiber optic links, and, thanks to the professional and unique casing design, the product can be mounted directly on a wall, panel or DIN Rail, without a need of using any unsecured DIN-Rail or wall-mount adapters. A separate external power supply is included in the package, and the unit is backed by our 30-day risk-free money-back guarantee and 5-year replacement warranty.

COMMFRONT SERIAL PROTOCOL ANALYZER

RS232 Serial Data Monitor Protocol Analyzer

RS232 Serial Data Monitor Protocol Analyzer

    CommFront 232Analyzer is an advanced serial port protocol analyzer software that allows programmers, engineers, and others to control, monitor and analyze serial port (RS232 / RS485 / RS422 / TTL, etc.) activities. 232Analyzer supports data input and monitoring in ASCII, hexadecimal, decimal, octal and binary formats. It also allows you to monitor or change RS-232's Handshaking line states: RTS, DTR, CTS, DSR, DCD, and RI. With the port-powered RS232 to RS485/RS422 or RS232 to TTL converter, it also allows you to monitor or control RS485/RS422/TTL devices. All data and handshaking signal flows are logged in the communication window, which can be saved as .txt, .doc or .rtf files for further analysis.
 
We accept all major credit cards, Paypal payment, as well as Money Orders or Checks for Purchase Orders. We ship products by FedEx or USPS Priority Mail. Same day express shipping is also available when you place the order with FedEx express shipping (you may also use your own FedEx account) before 5:30p.m. EST.
 
Copyright 2009 - 2015 data-converters.com